Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 13 (kliknij aby zobaczyć)
EN
13
Shoulder Strap Attachment
3 1 2
1 2
1
Following the illustration at left, thread the strap through the top of the eyelet 1, then fold it back 2, and then and thread it through the keeper through the buckle 3. Repeat the procedure to attach the other end of the strap to the other eyelet, making sure the strap isn�t twisted. Adjust as shown in the illustration at left 1, then slide both keepers snug against the eyelets to prevent slipping 2.
ATTACH STRAP
ADJUST LENGTH
2
Tripod Mounting
ALIGN AND TIGHTEN
1
Align the screw and camera direction stud on the tripod with the camera�s mounting socket and stud hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend its legs fully to stabilize the camcorder. To prevent damage to the unit caused by falling over, do not use a small-sized tripod.
