Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 48 (kliknij aby zobaczyć)
48 EN
TROUBLESHOOTING
? Appears when playing back a file that is not compatible with DCF or a file with a size that is not compatible with this camcorder. UNIT IN SAFEGUARD MODE REMOVE AND REATTACH BATTERY The error indications (01, 02 or 06) show what type of malfunction has occurred. When an error indication appears, the camcorder turns off automatically. Remove the power supply (battery, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer. UNIT IN SAFEGUARD MODE EJECT AND REINSERT TAPE The error indications (03 or 04) show what type of malfunction has occurred. When an error indication appears, the camcorder turns off automatically. Eject the cassette once and reinsert it, then check if the indication clears. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.
LENS CAP Appears for 5 seconds after power is turned on if the lens cap is attached or when it is dark. A. DUB ERROR! Appears if Audio Dubbing is attempted on a blank portion of a tape. ( pg. 43) A. DUB ERROR! <CANNOT DUB ON A LP RECORDED TAPE> <CANNOT DUB ON A 16BIT RECORDING> <CHECK TAPE�S ERASE PROTECTION TAB> � Appears if Audio Dubbing is attempted on a tape recorded in the LP mode. ( pg. 43) � Appears if Audio Dubbing is attempted on a tape recorded in 16-BIT audio. ( pg. 43) � Appears if A. DUB (D) on the remote control is pressed when the erase protection tab is set to �SAVE�. ( pg. 43) INSERT ERROR! Appears if Insert Editing is attempted on a blank portion of a tape. ( pg. 44) INSERT ERROR! <CANNOT EDIT ON A BLANK PORTION> <CANNOT EDIT ON A LP RECORDED TAPE> <CHECK TAPE�S ERASE PROTECTION TAB> � Appears if Insert Editing is attempted on a blank portion of a tape. � Appears if Insert Editing is attempted on a tape recorded in the LP mode. ( pg. 44) � Appears if INSERT (I) on the remote control is pressed when the erase protection tab is set to �SAVE�. ( pg. 44) HDV Appears when pictures recorded in the HDV format are detected. The pictures in the HDV format cannot be played back with this camcorder.