Advanced features
SYMPTOM 13. The focus does not adjust automatically. POSSIBLE CAUSES CORRECTIVE ACTION 13. � Focus is set to the Manual 13. � Set Focus to the Auto mode. mode. ( pg. 43) � The recording was done in a � Clean the lens and check the dark place, or the contrast focus again. ( pg. 73) was low. � The lens is dirty or covered with condensation. 14. � The 5-Second mode is set to 14. � Set �5S� to �5S� in MANUAL �Anim.� in MANUAL Menu. Menu. ( pg. 31, 35) 15. � The Squeeze mode (SQUEEZE) is selected. 15. � Disengage the Squeeze (SQUEEZE) mode. ( pg. 31, 36)
14. In the 5-Second mode, recording ends before 5 seconds have elapsed. 15. Snapshot mode cannot be used. 16. The colour of Snapshot looks strange.
16. � The light source or the 16. � Find a white subject and subject does not include compose your shot so that it white. Or there are various also appears in the frame. different light sources behind ( pg. 23, 41) the subject. � Disengage the Sepia (SEPIA) � The Sepia (SEPIA) or and Monotone Monotone (MONOTONE) (MONOTONE). ( pg. 31, mode is activated. 33) 17. � Shooting was performed under backlit conditions. 18. � The subject is too bright. 19. � The Sepia (SEPIA) or Monotone (MONOTONE) mode is activated. 20. � The Power Switch is set to �A�. 17. � Press BACK LIGHT. ( pg. 45) 18. � Set �r� to �SPOTLIGHT�. ( pg. 33) 19. � Disengage the Sepia (SEPIA) or Monotone (MONOTONE) mode before setting White Balance. ( pg. 33) 20. � Set the Power Switch to �M�. ( pg. 13) 21. � Disengage the Sepia (SEPIA) and Monotone (MONOTONE). ( pg. 31, 33) 22. � Set the Power Switch to �M�. ( pg. 13) 23. � If you want the lighting to look more natural, set �GAIN UP� to �AGC� or �OFF�. ( pg. 31, 35)
17. The image taken using Snapshot is too dark. 18. The image taken using Snapshot is too bright. 19. White Balance cannot be activated.
20. Wipe/Fader effects do not work.
21. The Black & White Fader does 21. � The Sepia (SEPIA) or not work. Monotone (MONOTONE) mode is activated. 22. Program AE with special effects does not work. 23. The image looks like the shutter speed is too slow. 22. � The Power Switch is set to �A�. 23. � When shooting in the dark, the unit becomes highly sensitive to light when �GAIN UP� is set to �AUTO�.
