|
Dla tego produktu nie napisano jeszcze recenzji!
EN
Display
63
Audio Dubbing
6e
Audio Dub Standby mode
The audio track can be customized only when recorded in the 12-bit mode ( pg. 45).
NOTES:
� Audio Dubbing is not possible on a tape recorded in 16bit audio, on a tape recorded in the LP mode or on a blank portion of a tape. � To perform Audio Dubbing while watching on the television, make connections ( pg. 22).
Power Switch
Play back the tape to locate the point where editing will start, then press PAUSE (6).
1
2 While holding A.DUB (e) on the remote control, press PAUSE (6). �6e� appears. 3 Press PLAY (4) , then begin �narrating�.
Speak into the microphone. � To pause dubbing, press PAUSE (6).
Speaker
To end Audio Dubbing, press PAUSE (6), then STOP (5). To hear the dubbed sound during playback . . . ..... set �12BIT MODE� to �SOUND 2� or �MIX� in the Menu Screen ( pg. 48, 49).
4
Remote sensor
NOTES:
Stereo microphone
A.DUB PLAY STOP PAUSE
� Sound is not heard from the speaker during Audio Dubbing. � When editing onto a tape that was recorded at 12-bit, the old and new soundtracks are recorded separately. � If you dub onto a blank space on the tape, the sound may be disrupted. Make sure you only edit recorded areas. � If feedback or howling occurs during TV playback, move the camcorder�s microphone away from the TV, or turn down the TV�s volume. � If you change from 12-bit to 16-bit in mid-recording and then use the tape for Audio Dubbing, it is not effective from the point where 16-bit recording began. � During Audio Dubbing, when the tape moves to scenes recorded in the LP mode, scenes recorded in 16-bit audio or a blank portion, Audio Dubbing stops ( pg. 85).
RM-V717U (Provided with GR-DVL720 only)
OR
RM-V715U (Provided with GR-DVL520/ DVL320 only)
|
