|
Kto jest w sklepie?
Sklep przegląda 5728 gości
|
Kategorie
|
Informacje
|
Polecamy
|
|
|
|
|
Dla tego produktu nie napisano jeszcze recenzji!
40 EN
SNAPSHOT Button Power Switch
FOR RECORDING (cont.)
Snapshot (For Tape Recording)
This feature lets you record still images that look like photographs onto a tape.
SNAPSHOT MODE SELECTION
1 Set the VIDEO/MEMORY Switch to �VIDEO�,
then set the Power Switch to � MANUAL � while pressing down the Lock Button located on the switch.
Lock Button VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)
2 Press the MENU/BRIGHT wheel in. The Menu Screen appears. 3 Rotate the MENU/BRIGHT wheel to select � CAMERA�. Press it and the CAMERA Menu
appears.
4 Rotate the MENU/BRIGHT wheel to select �SNAP MODE�, then press it. 5 Rotate the MENU/BRIGHT wheel to select the
desired Snapshot mode, then press it. Rotate the MENU/BRIGHT wheel to select � RETURN� and press it twice. The Menu Screen closes.
SNAPSHOT RECORDING
Display Menu Screen
SNAP MODE � FUL L P I N�UP FRAME
FULL Snapshot mode with no frame
Press SNAPSHOT. �PHOTO� appears while the snapshot is being taken. If you press during Record-Standby . . . ..... �PHOTO� appears and a still image will be recorded for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode. If you press during Recording . . . ..... �PHOTO� appears and a still image will be recorded for approx. 6 seconds, then the normal recording resumes. � Regardless of the Power Switch position (� AUTO � or � MANUAL �), Snapshot recording takes place using the selected Snapshot mode. Motor Drive Mode Keeping SNAPSHOT pressed provides an effect similar to serial photography. (Interval between still images: approx. 1 second) � To remove the shutter sound, �BEEP� on pg. 44, 46. � If Snapshot recording is not possible, �PHOTO� blinks when SNAPSHOT is pressed. � If Program AE with special effects ( pg. 36) is engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks. � If SNAPSHOT is pressed when �DIS� is set to �ON� ( pg. 45), the Stabilizer will be disabled. � The Motor Drive mode is disabled when �REC SELECT� is set to � / � in the Menu Screen ( pg. 47). � During tape playback as well, all snapshot modes are available when � COPY� is set to �OFF� in the Menu Screen ( pg. 48). However, the shutter sound is not heard. � During Snapshot recording, the image displayed in the viewfinder may be partially missing. However, there is no effect in the recorded image. � When a cable is connected to the AV connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape.
1
NOTES:
PIN-UP Pin-Up mode
FRAME Snapshot mode with frame
There is the sound effect of a shutter closing.
|
|
|
> |
|