TROUBLESHOOTING (cont.)
� The cassette is in the wrong position. � The battery�s charge is low.
SYMPTOM
POSSIBLE CAUSES
� Set it in the right position ( pg. 12). � Install a fully charged battery ( pg. 8, 9). � Set it in the right position ( pg. 14).
CORRECTIVE ACTION
7 The memory card will not
load properly. used.
� The memory card is in the wrong position. � The Squeeze mode is selected.
8 Snapshot mode cannot be 9 The color of Snapshot looks
strange.
� Disengage the Squeeze mode ( pg. 48).
� The light source or the subject does � Find a white subject and compose not include white. Or there are your shot so that it also appears in various different light sources the frame ( pg. 26, 42). behind the subject. � Turn off Sepia and Monotone � The Sepia or Monotone mode is ( pg. 38, 39). activated. � Shooting was performed under backlit conditions. � The subject is too bright. � 10X optical zoom is selected. � The VIDEO/MEMORY Switch is set to �MEMORY�. � The Sepia or Monotone mode is activated. � When shooting in the dark, the unit becomes highly sensitive to light and the image takes on an effect similar to Slow Shutter. � Press the BACKLIGHT Button ( pg. 44). � Set �PROGRAM AE� to �SPOTLIGHT� in the Menu Screen ( pg. 38). � Set �ZOOM� to �40X� or �700X� in the Menu Screen ( pg. 47). � Set the VIDEO/MEMORY Switch to �VIDEO� ( pg. 17, 18). � Turn off Sepia and Monotone ( pg. 38, 39). � If you want the lighting to look more natural, set GAIN UP to �AGC� or �OFF� in the Menu Screen ( pg. 47).
0 The image taken using
Snapshot is too dark.
! The image taken using
Snapshot is too bright.
@ Digital Zoom does not work. # The Black & White Fader
does not work.
$ Even when Slow Shutter is
not selected, the image looks like it is activated.
