JVC GR-DVL9800EA
Instrukcja Obsługi

EN21
Snapshot mode with no frame

To Delete Unwanted Still Images . . . .... when unwanted still images are stored in the MultiMediaCard or its memory is full, refer to �Deleting Images� ( pg. 51) and delete unwanted still images. To Remove The Shutter Sound . . . .... when you do not want to hear the shutter sound, set BEEP/TALLY to �OFF� on the Menu Screen ( pg. 30, 31). The sound is no longer heard from the speaker.
NOTES: � Even if �DIS� is set to �ON� ( pg. 32), the Stabiliser will be disabled. � If Snapshot recording is not possible, �PHOTO� blinks when SNAPSHOT is pressed. � If Programme AE with special effects ( pg. 40) is engaged, certain modes of Programme AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks. � If shooting is not performed for approx. 5 minutes when the Power Switch is set to � � or � � and power is supplied from the battery pack, the camcorder shuts off automatically to save power. To perform shooting again, close the LCD monitor and re-open it. When using the viewfinder, push back it in and pull it out again. � The Motor Drive mode ( pg. 18) is disabled when the Shooting Mode Dial is set to �VGA� or �XGA�. � To reduce the Red-Eye effect in the subject�s eyes when the flash fires, pg. 34. � When a headphone set is connected to the PHONE connector, the shutter sound is not heard from the speaker. � Still images taken are compliant to DCF (Design rules for Camera File systems). They do not have any compatibility with devices which are not compliant to DCF. � In the XGA mode, images shot using a 800,000-pixel Progressive Scan CCD (effective area: 720,000 pixels, 962 x 774 pixels) are converted and stored in the XGA mode file size (1024 x 768 pixels).

There is the sound of a shutter closing.