JVC GR-DX307US
Instrukcja Obsługi

48 EN
NO E-MAIL CLIP STORED Appears if there are no video clip files stored in the memory card when you attempt memory card playback. CARD ERROR! Appears when the camcorder does not recognize the loaded memory card. Remove the memory card once and insert it again. Repeat these procedures until no indication appears. If the indication still appears, the memory card is corrupted. UNSUPPORTED FILE! Appears when playing back a file that is not compatible with DCF or a file with a size that is not compatible with this camcorder. CHECK CARD�S WRITE PROTECTION SWITCH � Appears when you attempt to shoot digital still images when the write protection tab on the SD Memory Card is set to the �LOCK� position. � Appears when you attempt MEMORY SELECT menu operation with a write-protected SD Memory Card loaded. E01, E02 or E06 UNIT IN SAFEGUARD MODE REMOVE AND REATTACH BATTERY The error indications (E01, E02 or E06) show what type of malfunction has occured. When an error indication appears, the camcorder turns off automatically. Remove the power supply (battery, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer. E03 or E04 UNIT IN SAFEGUARD MODE EJECT AND REINSERT TAPE The error indications (E03 or E04) show what type of malfunction has occured. When an error indication appears, the camcorder turns off automatically. Eject the cassette once and re-insert it, then check if the indication clears. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.

USER MAINTENANCE

Cleaning The Camcorder
Before cleaning, turn off the camcorder and remove the battery pack and AC Adapter. To clean the exterior Wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth. To clean the LCD monitor Wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor. To clean the lens Blow it with a blower brush, then wipe gently with lens cleaning paper.

NOTES:

� Avoid using strong cleaning agents such as benzine or alcohol. � Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. � Mould may form if the lens is left dirty. � When using a cleaner or chemically treated cloth refer to the cautions of each product. � To clean the viewfinder, please consult your nearest JVC dealer.