Separate the Velcro strip. Pass your right hand through the loop and grasp the grip. Adjust so that your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Lever. Refasten the Velcro strip.
3 2
180°
OFF
Viewfinder Adjustment
1
A
1 2
PL
M
Set the Power Switch to �
� or �
�.
Adjust the viewfinder manually for best viewability. Turn the Diopter Adjustment Control until the indications in the viewfinder are clearly focused.
Y A
3
� or
Set to � � �.
PAUSE
Shoulder Strap Attachment
1
2 4 3 1
Following the illustration, thread the strap through the eyelet 1, then fold it back and thread it through the buckle 2. Repeat the procedure to attach the other end of the strap to the other eyelet 3, making sure the strap is not twisted. Adjust as shown in the illustration 4.
2
Tripod Mounting
1
Align the screw and camera direction stud on the tripod with the camera�s mounting socket and stud hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend its legs fully to Stabilize the camcorder. To prevent damage to the unit caused by falling over, do not use a small-sized tripod.
