Loading Top Rack
The top rack is designed for cups, glasses, and smaller items. (See recommended loading patterns shown.) NOTE: The features on your dishwasher rack may vary from the drawings shown.
Fold down the extra shelf on the right side of the top rack to hold additional cups, or long items such as utensils and spatulas.
Adjustable top rack
You can raise or lower the top rack to fit tall items in either the top or bottom rack. One adjuster is located on each side of the top rack. To adjust the top rack 1. Hold the top rack with one hand near the adjuster.
Cup and glass load
Mixed load
s
2. With the other hand, turn the knob clockwise to raise a side of the rack. 3. Turn the knob counterclockwise to lower a side of the rack. Repeat the steps for the remaining adjuster as needed. The 2 adjusters can be turned separately or together to raise or lower the top rack. The top rack does not have to be level.
Place items so open ends face down for cleaning and draining. Load glasses in top rack only. The bottom rack is not designed for glasses. Damage can occur. Place cups and glasses in the rows between tines. Placing them over the tines can lead to breakage. China, crystal, and other delicate items must not touch each other during dishwasher operation. Damage may occur. Load plastic items in the top rack only. Only plastic items marked �dishwasher safe� are recommended. Load plastic items so the force of the spray does not move them during the cycle. To avoid chipping, do not let stemware touch other items. Small bowls, pans, and other utensils can be placed in the top rack. Load bowls in the center section for best stability.
s
s
Loading Bottom Rack
The bottom rack is designed for plates, pans, casseroles, and utensils. Items with cooked-on or dried-on food should be loaded with soiled surfaces facing inward to the spray. (See recommended loading patterns shown.) NOTE: The features on your dishwasher rack may vary from the drawings shown.
