Connecting to a TV, VCR or DVD Recorder
Make sure all units are turned off before connecting.
Open the cover.
AV Connector S Connector
Connect the cable so that the colors of the terminals and connectors match.
(White: audio left, red: audio right, yellow: video) AV Cable (provided)
AV Input Terminal for TV, VCR, or DVD Recorder When connecting the camera to a VCR/DVD recorder, also check the connection between the VCR/DVD recorder and the TV.
S-Video Cable (optional) Enables playback of even higher quality.
NOTES:
� It is recommended to use the AC adapter as the power supply instead of the battery pack. ( pg. 12) � To connect the camera to a PC, refer to SOFTWARE INSTALLATION AND USB CONNECTION GUIDE. � This camera is designed to be used with NTSC-type color television signals. It cannot be used with a television of a different standard.
Playback on TV
After connecting the camera to the TV in �Connecting to a TV, VCR or DVD Recorder� ( pg. 32)
1 2 3 4
Turn on the camera and the TV. Set the TV to its VIDEO mode.
(Only when connecting the camera to the VCR/DVD recorder)
Turn on the VCR/DVD recorder, and set the VCR/DVD recorder to its AUX input mode. Start playback on the camera. ( pg. 26, 30)
NOTE:
If the aspect ratio of the video you are playing is strange and the screen size can be changed on the TV, make adjustments on the TV.