|
Dla tego produktu nie napisano jeszcze recenzji!
MANAGING FILES
EN
41
Copying/Moving Still Image Files
You can copy or move still image files between the built-in hard disk (HDD) and SD card using the on-screen display. Before proceeding to following steps, � Make sure that SD card is inserted in the SD slot. � Make sure that enough free space is left in the copy/move destination medium.
To copy or move by selecting files
7 Press
� The index screen appears.
/
to select [FILE], then press 49. / to select a desired file,
8 Press
// then press 49.
� The check mark ( ) appears on the selected file. � To select other files, repeat this step. � The scroll bar can also be used with the zoom lever and / . ( pg. 30)
9 Press MENU to return to the previous screen. 10 Press / to select [EXECUTE], then
press 49.
1 Set the power switch to or . 2 Press MENU. The menu screen appears. 3 Press / to select [REC MEDIA
SETTING], then press 49.
11 File transfer starts.
� To stop the file transfer, press 49, then select [EXECUTE] and press 49.
12 When [COPYING (MOVING)
COMPLETED] appears, press 49 to finish the operation. To copy or move all still image files in the recording medium
4 Press
press 49.
/
to select [COPY/MOVE], then
/ to select [COPY] or [MOVE], then press 49. COPY: Files are copied to the destination medium while leaving original files in the source medium. MOVE: Files are moved to the destination medium while deleting original files (except read-only files) in the source medium.
5 Press
7 Press 8 Press
press 49.
/ /
to select [ALL]. to select [EXECUTE], then
� If you want to cancel, select [CANCEL], then press 49.
9 File transfer starts.
� To stop the file transfer, press 49, then select [EXECUTE] and press 49.
6 Press
/ to select the direction of copy/ move, then press . (HDD ] SD or SD ] HDD)
10 When [COPYING (MOVING)
COMPLETED] appears, press 49 to finish the operation.
ADVANCED OPERATIONS
|
