JVC GZ-MG40US
Instrukcja Obsługi

MANAGING FILES

EN

41

Copying/Moving Still Image Files
You can copy or move still image files between the built-in hard disk (HDD) and SD card using the on-screen display. Before proceeding to following steps, � Make sure that SD card is inserted in the SD slot. � Make sure that enough free space is left in the copy/move destination medium.

To copy or move by selecting files

7 Press

� The index screen appears.

/

to select [FILE], then press 49. / to select a desired file,

8 Press

// then press 49.

� The check mark ( ) appears on the selected file. � To select other files, repeat this step. � The scroll bar can also be used with the zoom lever and / . ( pg. 30)

9 Press MENU to return to the previous screen. 10 Press / to select [EXECUTE], then
press 49.

1 Set the power switch to or . 2 Press MENU. The menu screen appears. 3 Press / to select [REC MEDIA
SETTING], then press 49.

11 File transfer starts.

� To stop the file transfer, press 49, then select [EXECUTE] and press 49.

12 When [COPYING (MOVING)
COMPLETED] appears, press 49 to finish the operation. To copy or move all still image files in the recording medium

4 Press
press 49.

/

to select [COPY/MOVE], then

/ to select [COPY] or [MOVE], then press 49. COPY: Files are copied to the destination medium while leaving original files in the source medium. MOVE: Files are moved to the destination medium while deleting original files (except read-only files) in the source medium.

5 Press

7 Press 8 Press
press 49.

/ /

to select [ALL]. to select [EXECUTE], then

� If you want to cancel, select [CANCEL], then press 49.

9 File transfer starts.
� To stop the file transfer, press 49, then select [EXECUTE] and press 49.

6 Press

/ to select the direction of copy/ move, then press . (HDD ] SD or SD ] HDD)

10 When [COPYING (MOVING)
COMPLETED] appears, press 49 to finish the operation.

ADVANCED OPERATIONS