How to empty
26 B Turn cleaner off and disconnect from electrical outlet. Although not necessary for satisfactory performance, it is recommended that the recovery tank be emptied after dry vacuuming and before wet operation. Check the solution tank also. It may need to be refilled at this time. To remove tank, press down on release button (B) 26 and pull tank straight out. 27 C 27 Remove tank lid (C). Empty tank.
To clean filters
28 The tank lid contains a washable, reusable filter. Clean this pleated filter when suction is low or reduced. Turn cleaner OFF and disconnect from electrical outlet. 28 Remove recovery tank and lid (Figs. 26 & 27). Remove filter lid (A), then remove filter (B). Remove loose debris from filter by tapping the filter or gently brushing using your hand. The filter may also be rinsed for additional cleaning. Allow filter to air dry between uses.
A
B
29 Reposition filter. 29 Replace filter lid. Press down firmly until snapped in place. NOTE: The filter, filter lid and tanks must be replaced, or the unit will not work properly.
