1 Connect components to the recorder.
(see also �Hooking up the system� on page 7)
12After �CD SYNCHRO � Changer ��
disappears, press HDD H or HDD X.
Recording starts.
To stop recording
After turning on the CD changer, load the desired CDs into the CD changer.
2 Press MENU/NO.
�Edit Menu� appears in the display.
Press HDD x.
Tips
3 Turn ALBUM dial (or press ALBUM +/�
on the remote repeatedly) until �Setup?� flashes in the display, then press ALBUM dial or YES.
�Setup Menu� appears in the display.
� In steps 8 and 10, you can use the HDD l/L buttons to select the disc number. In this case, only disc numbers that are multiples of 10 can be selected. � In step 10, you can press the MENU/NO button to return to the display for selecting the starting disc. � If you set �TxtSave� to �On� in the setup menu, CD text (track name only) can be saved to the HDD automatically. � When using a CD changer that holds 300 or more CDs, set the CONTROL A1 setting on the CD changer to �CONTROL A1II�. � Synchro-Recording enables the assignment of album and track names from the CDDB2. For details on the CDDB2, refer to the Help for �M-crew for HAR-D1000�.
Notes
4 Turn ALBUM dial (or press ALBUM +/�
on the remote repeatedly) until �Sync Normal� (or �Sync High� or �SyncChanger�) appears in the display, then press ALBUM dial or YES.
5 Turn ALBUM dial (or press ALBUM +/�
on the remote repeatedly) to select �SyncChanger�, then press ALBUM dial or YES.
6 Press MENU/NO. 7 Press CD SYNC.
�CD SYNCHRO � Changer �� appears in the display.
� Do not turn off the CD changer during recording. � Do not disconnect the optical cable and the CONTROL A1 cable during recording. � The time and text information on the current CD do not appear in the recorder�s display. � If the HDD becomes full during recording, recording ends automatically. � You cannot pause recording during SynchroRecording. � Depending on the condition of the CD changer, some CDs may not be recorded or recording may have stopped in the middle of some CD. Check the condition of the CD changer and record the CDs again. � Depending on the way your CD changer operates, a short track with no sound may be recorded in some cases. � The CD changer�s play mode automatically switches to Normal Play. � The HDD play mode automatically switches to Normal Play. � Sound input automatically switches to �OPT� during Synchro-Recording. � The recording level changes to 0.0 dB automatically during CD-HDD Synchro Recording no matter what the setting in the setup menu is. � While �Remote� appears in the CD changer�s display, most of the controls and buttons for the CD changer are inoperative. � CD text may not be saved for short tracks. � The supplied M-crew for HAR-D1000 does not support Synchro-Recording from a CD changer.
8 When �Start Disc� appears in the
display, turn ALBUM dial (or press ALBUM +/� on the remote repeatedly) to select the starting disc among those loaded in step 1.
9 Press ALBUM dial or YES.
�End Disc� appears in the display.
Other Functions
10Turn ALBUM dial (or press ALBUM +/�
on the remote repeatedly) to select the ending disc among those loaded in step 1.
11Press ALBUM dial or YES.
The HDD stands by for recording and the CD changer stands by for playback. In the albums containing no tracks, the one with the smallest album number is automatically set as the recording destination. If you want to change an album position, turn ALBUM dial (or press ALBUM +/� on the remote repeatedly) to select the desired position.
