jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
HCD-DP1000D
[Aging Mode] This mode can for operation check of tape deck section and DVD section. � If an error occurred: The aging operation stops and display then status. � If no error occurs: The aging operation continues repeatedly. Procedure: 1. Press the DVD button to select the function �DVD�. 2. Load the tapes into the decks A and B respectively. 3. Set a disk in �DISK1� tray. 4. Press the PLAY MODE button to set the �ALL DISCS� mode, and press the REPEAT button to �REPEAT� off. 5. Press three buttons of x , ENTER , and DISC SKIP/EXCHANGE simultaneously. 6. The aging mode is activated, if the indicator of DOLBY NR is blinking. 7. To exit from the aging mode, operate the cold reset. [Tape Deck Section] � The sequence during the aging mode is following as below. � If an error occurred, stop display that step. Aging mode sequence (Tape deck section): Rewind the tape A and B �TAPE A AG-1� Shut off FWD play the tape A �TAPE A AG-2� 2 minutes Fast forward the tape A �TAPE A AG-3� Shut off or 20 seconds RVS play the tape A �TAPE A AG-4� 2 minutes Rewind the tape A �TAPE A AG-5� Shut off FWD play the tape B �TAPE B AG-2� 2 minutes Fast forward the tape B �TAPE B AG-3� Shut off or 20 seconds RVS play the tape B �TAPE B AG-4� 2 minutes Rewind the tape B �TAPE B AG-5� Shut off
