SONY HCD-FR8
Instrukcja Serwisowa

HCD-FR1/FR8/FR9 SECTION 2 ASSEMBLY
� This is can be assemble according to the following sequence.

2-1. HOW TO INSTALL THE CAM (EJECT LOCK)

1 Rotate the cam (BU U/D) fully in the direction of arrow. 2 Engage the gear (eject lock) and the gear of the cam (eject lock) aligning the mark with the center of the gear (eject lock).

cam (BU U/D)

mark

gear (eject lock)

cam (eject lock)

� bottom view � front �

2-2. HOW TO INSTALL THE CAM (GEAR)

1 Check that the cam (BU U/D) can not be rotated in the direction of arrow. 2 Align the mark on the cam (gear) with the boss as shown in the figure and install the cam (gear).

cam (gear) cam (BU U/D)

boss

mark

� bottom view � front �

12