SONY HCDM300AV
Instrukcja Serwisowa

3. The tape A runs in fast forward. After two minutes of fast forward, or at the shut-off point, the tape is stopped and the aging mode advances to the next step. The message: TAPE A AG-3 appears. 4. The tape A is played back in the RVS mode. After two minutes of the RVS playback, the aging mode advances to the next step. The message: TAPE A AG-4 appears. 5. The tape A is rewound and stops at the shut-off. The aging mode advances to the next step. The message: TAPE A AG-5 appears. 6. The tape B is played back in the FWD mode. After two minutes of the FWD playback, the aging mode advances to the next step. The message: TAPE B AG-2 appears. 7. The tape B runs in fast forward. After two minutes of fast forward, or at the shut-off point, the tape is stopped and the aging mode advances to the next step. The message: TAPE B AG-3 appears. 8. The tape B is played back in the RVS mode. After two minutes of the RVS playback, the aging mode advances to the next step. The message: TAPE B AG-4 appears. 9. The tape B is rewound and stops at the shut-off. The aging mode advances to the next step. The message: TAPE B AG-5 appears.

[AM TUNER STEP 9 kHz/10 kHz Selection Mode] * Either the 9 kHz step or 10 kHz step can be selected for the AM channel step. Procedure: 1. Turn on the power and select TUNER using the FUNCTION button. 2. Select AM with the TUNER/BAND button and turn off the power. 3. Press the two buttons ENTER and @/1 at the same time. The main power is turned on and the other frequency step of the previous mode is selected and displayed. �AM 9 k STEP� or �AM 10 k STEP�

[CD SRAM Test Mode] Procedure: 1. Turn on the power and select CD using the FUNCTION button. 2. Press the three buttons x , ENTER and DBFB at the same time. 3. The message �SRAM OK� appears on the fluorescent indicator tube.

[GC VACS ON/OFF Mode] Procedure: 1. Press the two buttons DELETE and @/1 at the same time. 2. The message �VACS ON� or �VACS OFF� appears on the fluorescent indicator tube.

17