SONY HCDXG100AV
Instrukcja Serwisowa

HCD-XG100AV/XG900AV

Pin No. 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

Pin Name AMS-IN TC-MUTE R/PB/PAS NR-ON/OFF REC-MUTE BIAS EQ-H/N PB-A/B ALC B-PLAY-SW A-PLAY-SW A-HALF B-HALF B-SHUT A-SHUT SOFT-TEST HP MUTE KEY/CD-ADJ MODEL-IN AVSS SPEC-IN VREF AVCC TC-RELAY

I/O I O O O O O O O O I I I I I I O O I I � I I � O

Description Whether a music is present or not from HA12215F (IC301) is detected at automatic music sensor �L�: music is present, �H�: music is not present Line muting on/off selection signal output to the HA12215F (IC301) �L�: muting off, �H�: muting on Recording/playback/pass selection signal output to the HA12215F (IC301) �L�: recording mode, �H�: pass, �Hi-z�: playback mode Dolby NR on/off selection signal output to the HA12215F (IC301) �L�: dolby off, �H�: dolby on Recording muting on/off selection signal output to the HA12215F (IC301) �L�: muting on, �H�: muting off Recording bias on/off selection signal output to the HA12215F (IC301) �L�: bias off, �H�: bias on Normal/high speed selection signal output to the HA12215F (IC301) �L�: normal speed, �H�: high speed Deck-A/B selection signal output to the HA12215F (IC301) �L�: deck-A, �H�: deck-B Automatic limiter control signal output to the HA12215F (IC301) �L�: limiter on Detection signal input from the deck- B play detect switch (S1002) �H�: deck-B play Detection signal input from the deck- A play detect switch (S1001) �H�: deck-A play Detection signal input from the deck-A cassette detect switch (S1003) �L�: no cassette, �H�: cassette in Detection signal input from the deck-B half detect switch (S1006) Shut off detection signal input from the deck-B side reel pulse detector (IC1002) Shut off detection signal input from the deck-A side reel pulse detector (IC1001) Output terminal for the software test (open) Headphone muting control signal output �L�: muting on, �H�: muting off Setting terminal for the CD adjustment mode Model setting terminal Ground terminal (for A/D conversion) Destination setting terminal Reference voltage (+5V) input terminal Power supply terminal (+5V) (for A/D conversion) Recording/playback selection signal output to the REC/PB switch (IC602) �L�: playback, �H�: recording Not used (fixed at �L�)

56