Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
!� POWER switch Turns the power to the HDCA-701 on and off. Can be used to reduce power consumption by supplying power only to the audio circuits when the output from the HD SDI circuits is not being monitored. ON ALL: Supplies power to all circuits. ON SEL: Supplies power only to the audio circuits, (power for HD SDI output is cut). Supplying power only to the HD SDI output circuits while cutting power to the audio circuits is also possible.
For details, refer to the supplied Maintenance Manual.
OFF: Turns the HDCA-701 off. In this case, the HDW-700A can be independently turned on and off using the POWER switch on the HDW-700A.
Note
When the POWER switch on the HDCA-701 is set to ON ALL or ON SEL, the POWER switch on the HDW-700A controls the power supply to both the camcorder and camera adaptor at the same time.