SONY HKPF-E270
Instrukcja Serwisowa

Section 1 Attachment
1-1. Supplied Accessories
The supplied accessories of HKPF-E270 are as follows. . Label :1 . Maintenance manual : 1 . Operation manual :1 3. Insert the board along the board guide rail.

1-2. Board Attachment
. This section is described how to attach the board in PFVHD300. For how to attach it in models other than PFVHD300, refer to the manual supplied for each model. . Insert the board in any blank slot of PFV-HD300. n Do not insert the board in the slot No. 14. Front panel 1. Loosen the four screws (with stopper) and detach the front panel. 2. Unscrew the six screws and detach the board supports. 4. Insert the board in the slot as far as it will go and close the two board levers in the directions of arrows 1.

Board guide rail

Board

Put the component side so that it is viewed from the right side.

1

2

2 1 Board lever 1 PSW3 x 6 2 Board lever 1Attachment 2Detachment 1 2

PSW3 x 6

Board supports

5. Put the supplied label onto the board lever. 6. Attach the board supports. 7. Attach the front panel. n When detaching the board, pull out the board toward you while pushing the two board levers in the directions of arrows 2.

HKPF-E270 MM

1-1 (E)