...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 11 (kliknij aby zobaczyć)
2.4
Paper Loading (1) Multi-purpose sheet feeder loading Paper size: A4, Letter, Legal, B5, A5, A6, and Executive. Other sizes of media that can be handled by the feed mechanism can be loaded.
69.8 to 229 mm
105 to 356mm (face down)
Feeding direction
Feedable paper weight: 60 (16lb.) to 158 (42lb.) g/m2 Maximum load height : Setting method: 22mm (200 sheets of 80g/m2 paper) letter or A4 size Pull the MP sheet feeder cover toward you, insert the stack of paper into the feeder, aligning the top edge of the sheets, then push the cover back to its original position.
(2)
Manual slot loading Paper size: Setting methods: Same as in (1) for the multi-purpose sheet feeder. Place the side of the paper to be printed on face down into the manual feed slot after selecting orientation. Align the paper at the center of the manual feed slot, and be sure to insert it fully into the feed slot. Move the paper guide of the manual feed slot to the paper width. Feedable paper weight: Same as in (1) for the multi-purpose sheet feeder.
Cautions: Before loading paper with holes such as organizer sheets, be sure to fan the stack well. When printing on the back of pre-printed paper, be sure to straighten the paper as much as possible.
2.5 Print Delivery (1) (2) With the output tray opened Tray capacity: Maximum 100 sheets (80g/m2), face-down only With the output tray closed Tray capacity: 1 sheet (80g/m2), face-down only
Note: Face down: Environment :
Deliver the printed face of the paper downward. 23°C
