4 Check the current play mode of the CD player.
All-track high-speed recording
If it is in play mode, stop it.
7 stop
Tuning Mode
Single-track high-speed recording
Select the desired CD track and play it.
÷ When step 5 is performed in the middle of CD playback, the current track will be recorded from the beginning. (To record other tracks, repeat steps 4 and 5 for each track)
5 Start recording.
1 Press the menu key. 2 Turn the volume/multi control knob to select "REC OPTIONS", then press the set/ demo key. 3 Turn the volume/multi control knob to select "CD = MD", then press the set/demo key to start high-speed recording.
If you want to control step 5 from the remote, simply press the MD O.T.E. key once to start recording.
Turning the knob switches the display contents. 1 "CD = MD" : Select for high-speed recording of CD onto MD. 2 "CD = TAPE" 3 "TWIN REC"
The recorded audio may skip, noise may be recorded on the MD or unnecessary tracks may be created depending on the condition of the CD. In such a case, restart recording at the normal speed.
÷ When either the playback of CD or recording of MD or tape is stopped, the other operation is stopped automatically.
To interrupt a recording
At the end of the recording
7 stop
Tuning Mode
MD recorder : Stop. ÷ One high-speed recording starts, it is not permitted to record the same disc with high-speed recording for 74 minutes after the start of recording. If you want to record the same disc immediately, use one-touch edit recording (recording at normal speed). r
Application section
(Recording and playback will be stopped) Do not turn power off or apply shock or impact while "MD WRITING" is displayed. If the power cord is unplugged before "MD WRITING" disappears, the recorded or edited data will be lost.
Wait 74min.
Time period until high-speed recording of the same disc is permitted ÷ High-speed recording of more than 100 tracks within 74 minutes is not permitted.
