KENWOOD HM-636
Instrukcja Obsługi

Basic use method

Listening through headphone
Insert the headphone plug into the headphone jack.

Tone adjustment
Remote control unit only

The lowest and highest frequency bands can be adjusted independently.

÷ Headphone with a stereo mini plug can be connected. ÷ The sound from all speakers are cut off.

1 Select the frequency band.
TONE

Muting the sound temporarily
Remote control unit only

Each press switches the operation. 1 "BASS" (low frequency) adjustment
MUTE

÷ Press again to resume the original volume. ÷ This is also canceled when the volume is changed.

Enhancement of bass

2 "TREBLE" (high frequency) adjustment

3 Normal mode
SOUND

(Go to step 2 within 8 seconds.)

2 Adjust.
Each press switches the modes as follows. 1 "EX.BASS" lights.
The low frequencies are enhanced regardless of the current volume level.
4 P.CALL 4

2 "LOUD" (Loudness) lights.
The low frequencies are enhanced according to the current volume level. (Effective during low-volume listening.) (To adjust the other frequency band, repeat steps 1 and 2 for it.)

3 Both indicators off.
Canceled. ÷ The levels of both "BASS" and "TREBLE" can be adjusted in 2 steps in the range between � 8 and +8. ÷ Adjusting the tone while the "LOUD" or "EX.BASS" indicator is lit turns it off and cancels the sound enhancement mode.

÷ Adjusting the tone while the "LOUD" or "EX.BASS" indicator is lit turns it off and cancels the sound enhancement mode.

15 EN