3.9 Adding Reverb
The HP-1 allows you to add reverberation to what you play on the keyboard. This effect gives the impression that you are performing in a concert hall or similar space.
A
C
Softer Reverb
Louder Reverb
Switching the Reverb effect on and off
At power-on, the digital Reverb effect is switched off. To use this effect, you need to switch it on:
Setting the Reverb level
You can also set the volume of the Reverb effect to accommodate the sound your are using. You may want to select a higher Reverb level for the �Organ� sounds (to simulate the reverberations of a church) than for the piano sound, for example. There are eight possible Reverb level settings. At power-on, the HP-1 selects level �3�.
1. Press the [Reverb] button to switch the Reverb effect on (or off). The button�s indicator lights when the Reverb effect is
on. 2. Repeat the above to switch the Reverb back off (or on) again.
3. Simultaneously press [Demo] and [Reverb] to enter Function mode (both indicators �ash). 4. Press a key between the �A2� and the �E3� (see the keyboard illustration above) to set the desired Reverb level.
