Listening through Headphones
You can use headphones to enjoy the HP207 without disturbing those around you, such as at night. Since the HP207 has two headphone jacks, two people can also use headphones simultaneously. If you�re using only one set of headphones, you may connect them to either of the two headphone jacks.
fig.Headphones.eps
Using the Headphone Hook
Whenever you are not using the headphones, you can hang them on the headphone hook of the HP207.
Attaching the Headphone Hook
1.
Press and twist the headphone hook included with the HP207 into the hole in the bottom left of the HP207 (refer to the figure above).
2.
Turn the headphone hook wing nut to secure the headphone hook.
Headphones
Headphone Hook
1.
Plug the headphones into the PHONES jack located at the left of the HP207�s bottom panel.
If headphones are connected, no sound will be output from the HP207�s speakers.
NOTE
Do not hang anything other than headphones on the headphone hook. Doing so may damage the instrument or the hook. If headphones are connected, a headphone symbol is shown in the lower left of the screen.
fig.PhonesMark.eps
2.
Use the HP207�s [VOLUME] knob (p. 19) to adjust the headphone volume.
Cautions when Using Headphones
� To prevent damage to the cord�s internal conductors, avoid rough handling. When using headphones, mainly try to handle either the plug or the headset. � Your headphones may be damaged if the volume of a device is already turned up when you plug them in. Minimize the volume before you plug in the headphones. � Excessive input will not only damage your hearing, but may also strain the headphones. Please enjoy music at an appropriate volume. � Use headphones that have a stereo 1/4� phone plug.
