cursor up or down button.
This is set to �F#3� when the power is turned on.
The Split Point is changed. You can change the split point within the range of B1 through B6.
Cancelling the Split Performance
When the Split Performance is set to On, the mark at the <Split> in the Menu screen icon turns red. Use the following procedure to cancel the split.
1.
Press the press the [
cursor button to select <Split> on the Menu screen, then ] button.
The red mark at the <Split> icon in the Menu screen turns gray.
Enabling Split Performance When Dual Performance is Already Enabled
By enabling Split Performance while the HPi-6 is already in Dual Performance mode, you can then split the keyboard into left and right sections, while also having two tones play in the right side.
1. 2. 3.
Simultaneously press two tone buttons to switch to Dual Performance. Press the [Menu/Lesson] button. Press the button. cursor button to select <Split>, then press the [ ]
Split is now enabled. In addition, Dual performance is enabled in the right-hand side of the keyboard.
Left-hand Tone Displays the tone name for the left Tone button that is selected. Split Point Displays the key between the right-hand and left-hand keyboard areas. Tone 1 Displays the name of Tone 1 of the Dual performance in the right-hand area.
Dual Balance This shows the relative balance in volume between the two tones selected for the right-hand side.
Tone 2 Displays the name of Tone 2 of the Dual performance in the right-hand area.
To Switch From Split to Dual Performance
1. 2.
Set the HPi-6 to Split Performance (p. 52). After pressing the two tone buttons. cursor button to select the right-hand tone, press
Split Performance is enabled. In addition, Dual Performance is enabled in the righthand part.