PHILIPS HR2939/09
Instrukcja Obsługi

English
introduction The chopper is intended for chopping ingredients such as onions, meat, herbs, vegetables, fruit, chocolate, firm cheese, baby food and nuts. The chopper is suitable for Philips blender types: - HR2074 - HR2071 - HR2069 - HR2067 - HR2066 - HR2064 - HR2063 - HR2061 general description (Fig. 1) A B C D Lid Blade unit Chopper bowl Coupling unit

1 Insert the coupling unit into the bottom of the chopper bowl (1) and turn it anticlockwise to fix it (2) (Fig. 2). 2 Place the chopper bowl (1) on the blender motor unit and turn it clockwise to fix it (2). (Fig. 3) 3 Place the blade unit in the chopper bowl (Fig. 4). 4 Put the ingredients in the chopper bowl (Fig. 5). See the table below for the recommended quantities. Do not exceed the maximum quantities indicated in the table.

guarantee & service If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, go to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV.

Maximum quantities
Ingredients Onions Meat (lean, uncooked) Herbs (e.g. parsley) Vegetables/fruit (uncooked) Chocolate Cheese (firm, crustless) Baby food Nuts (shelled) Max. quantities 50-150g 50-200g 10-20g 75-150g 50-75g 50-100g 100-200g 25-150g

important Read this user manual carefully before you use the chopper and save it for future reference. To use the blender motor unit, follow the instructions in the user manual of the blender. -

Warning

-

Do not use the chopper if it is damaged. Do not touch the blades, especially when the chopper is connected to the blender motor unit. The blades are very sharp. Make sure the coupling unit is securely fastened to the chopper bowl before you assemble the chopper onto the motor unit. Never reach into the chopper bowl with your fingers or an object while the chopper is operating. The chopper is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the chopper by a person responsible for their safety. Children should be supervised to ensure that they do not play with the chopper. Never let the chopper operate unattended. If the blades get stuck, unplug the blender motor unit before you remove the ingredients that block the blades. Never use the chopper bowl to switch the motor unit of the blender on and off.

Tip: Precut large pieces of food into pieces of 1-2cm. 5 Put the lid on the chopper bowl (1) and turn it clockwise to fix it (2) (Fig. 6). Note: Make sure the lid is properly fixed before you switch on the blender motor unit. 6 Switch on the blender motor unit. Note: If the appliance shakes because the food is not evenly distributed, put your hand on the lid. Note:The chopper does its work in a few seconds. Never let it run longer than a few seconds. 7 When you have finished chopping, switch off the blender motor unit and unplug it. 8 Turn the chopper anticlockwise (1) and remove it from the blender motor unit (2). (Fig. 7) Always remove the chopper from the motor unit before you empty the chopper bowl. 9 Turn the coupling unit clockwise (1) and remove it from the bottom of the chopper bowl (2) (Fig. 8). 10 Remove the lid and the blade unit from the chopper bowl. 11 Empty the chopper bowl. Cleaning Always unplug the blender motor unit before you clean the chopper. Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the chopper. 1 Disassemble the chopper. 2 Clean the coupling unit with a moist cloth. Never immerse the coupling unit in water or any other liquid. Do not clean the coupling unit in the dishwasher. 3 Clean the chopper bowl, the lid and the blade unit in warm water with some washing-up liquid. Note:You can also clean these parts in the dishwasher. Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 9).

-

Caution

-

Always unplug the blender motor unit before you assemble, disassemble or make adjustments to any of the parts. Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid. Do not exceed the maximum quantities indicated in the table. If food sticks to the wall of the chopper bowl, switch off the blender motor unit and unplug it. Then use a spatula to remove the food from the wall. Always make sure the lid is properly assembled on the chopper bowl before you switch on the blender motor unit. Never fill the chopper bowl with ingredients hotter than 80ºC. Do not use the chopper to mix liquids. Use the blender jar instead. Never immerse the coupling unit in water or any other liquid. The gearwheels inside the coupling unit have been lubricated. Do not lubricate them again.

Before first use Thorougly clean the parts that come into contact with food before you use the chopper for the first time (see chapter �Cleaning�). Using the appliance Be careful when you place or remove the blade unit: the cutting edges of the blade are very sharp.

4222.002.3023.2

2/3