...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 1 (kliknij aby zobaczyć)
Food processor HR 7720
Philips Domestic Appliances and Personal Care
MSH coding 8837 720 00000
PRODUCT INFORMATION The food processor is equipped with mechanical and thermal safety switches. Motor power Voltage Cordset Speed settings Speed unloaded Weight in fancy box Dimensions (l x w x h) : 600 W : 220-240 V ; 50-60 Hz : 120 V ; 50-60 Hz : 125 cm : 2 speeds + pulse : acc. drive shaft 2150 rpm : 5400 g : 410 x 273 x 305
SERVICE INFORMATION
�
A separate drawing shows how to disconnect the speed selection knob.
Automatic resettable cut-out (part of item 7) To prevent damage due to overheating, the appliance has been equipped with an automatic cutout system. If the appliance overheats, this system will automatically cut off the power supply. If the appliance suddenly stops running: � Unplug the appliance
� � � �
�
Top housing (item 35) can be removed by detaching the snap connections by sticking a pin (or a screwdriver) through the small round holes (3 mm dia.) in the bottom plate (item 27) and the housing (item 12). The arrows in the drawing show the locations of the holes.
�
Set the knob to position 0 Let the appliance cool down for 15 minutes Plug the appliance in again Switch the appliance on again.
�
The accessory drive shaft (item 15) has a locking piece (item 14). The assembly of accessories depends on the national version. For specific versions, the component configuration may differ from the one shown on the exploded view. However, the actual components can be distinguished by their code numbers.
�
Safety lock (item 1) Place the lid on the bowl in the right position. The appliance will only function if the arrow on the motor unit is directly opposite the mark on the lid. The built-in safety lock will now be deblocked and you can turn the appliance on.
Published by Philips Domestic Appliances and Personal Care
