You have three choices: D.S.T. SELECT a�Select �AUTO� and the adjustment to your VCR�s =AUTO ON clock will be made OFF according to the incoming signal from the host channel. PRESS (5,�) TO SELECT PRESS (MENU) TO END b�Select �ON� and the adjustment will be made based on the clock itself. c�Select �OFF� if Daylight Saving Time doesn�t apply to you. Place the arrow next to your choice by pressing CH5�, then press MENU and the Semi-Auto Clock Set screen reappears.
C H
O K
OK
IMPORTANT
After performing the Semi-Auto clock set procedure, make sure that the VCR is off before the next hour so that the clock can be set. (The clock is automatically adjusted on the hour except at 11:00 PM, midnight, 1:00 AM and 2:00 AM.)
1 2 5 3 6
NUMBER
4
Manual
7 8 9 0
T Y
SELECT MODE
At the Override Auto Clock Set screen, place the
2
2 4 3 q 5 6
arrow next to �MANUAL CLOCK SET� by pressing CHvw, then press OK.
SET DATE, TIME AND D.S.T.
3
MENU
The Manual Clock Set screen is displayed and the first setting that can be set begins flashing. Press the appropriate NUMBER keys to set the date and time (if only 1 digit, press "0" first).
MANUAL CLOCK SET DATE TIME D.S.T. 1/ 1/96 MON � � : � � AM ON
CH
Press CHvw to set AM/ PM and D.S.T. (Daylight Saving Time) to �ON� (automatic adjustment based on VCR�s clock) or �OFF� (if D.S.T. does not apply to you). Press OK after AM/PM and D.S.T. settings. The next setting that can be set begins flashing. When you�re finished with this set-up procedure, press MENU to start the clock.
PRESS NUMBER KEY(0-9) OR (5,�), THEN (OK) PRESS (MENU) TO END
NOTE:
CHvw can be used to perform all operations. (In this case, press OK after each setting.)
MAKE CORRECTIONS
4
To change any of the settings, press OK until the item you want to change blinks, then set as in step 3.