Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 5 (kliknij aby zobaczyć)
� Connections and VCR channel Setting �
4
Set VCR channel
Initial Settings
Language Setting
The default setting is �ENGLISH�.
To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel) when a TV is connected with the 75 ohm coaxial cable only.
1 Press and hold POWER on the unit for 3 seconds in
1
Access Menu screen
standby mode. The video channel will start to flash in the display. Press CH �/+ to set the video channel 3 or 4.
2 Press ENTER to set the
Press MENU on the Remote. Press SET �/+ to select �LANGUAGE�, then press ENTER.
selected video channel in step 1 into the memory.
3 Turn ON the TV and set to CH 3
or 4 to correspond with the channel selected in step 2.
4 Turn on the VCR and select any
CH 125
This VCR offers you the language choice to view menus and some messages � in English, Spanish or French. Press SET �/+ to select your desired language, then press ENTER.
Press MENU twice to return to normal screen.
Clock Setting Preparations
You must set the date and time for timer recording.
channel to receive a TV station in your area. The channel number will appear on the screen and display for about 4 seconds.
1
Access Menu screen
Press MENU on the Remote. Press SET �/+ to select �CLOCK SET�, then press ENTER.
To make corrections any time during the process Press CANCEL repeatedly until the item you want to change blinks, then press SET �/+. NOTE: After a power failure or disconnection of the power, the timer settings will be lost. In this case, reset the present time.
