D Access the Initial Set screen.
Press rt to move the highlight bar (arrow) to �INITIAL SET�, then press OK or e.
T
W
1 7 4
2
8 5 0
9 6
3
2
E Access the Cable Box Set screen.
4
Press rt to move the highlight bar (arrow) to �CABLE BOX SET�, then press OK or e.
1
DV
S-VHS
F Select the cable box�s channel.
3
Your selection depends on how the cable box is connected to your VCR. If the cable box is connected to your VCR�s ANTENNA IN connector on the rear panel, press rt until the channel number representing the cable box�s output (CH2 � CH9) appears on the screen. If the cable box is connected to your VCR�s AUDIO/ VIDEO IN connectors on the rear panel, press rt until �ON L-1 (REAR)� appears on the screen. If you do not use a cable box, press rt until �OFF� appears on the screen.
Setting cable box's brand and channel
After installation, set the cable box�s brand and channel correctly; otherwise, the Controller cannot work correctly. Turn on the TV and select the AV mode.
A Turn on the VCR.
Press POWER.
B Turn on the cable box.
Turn on the cable box�s power.
C Access the Main Menu screen on the VCR.
Press MENU.
