Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view. � The programme selected with the TV�s channel controls appears on the TV screen while the one selected with the recorder's TV PROG buttons is recorded on the tape.
RECORD
Elapsed Recording Time Indication
You can check the exact time of a recording.
P R
SET COUNTER DISPLAY
1
DISPLAY
1 4 7/ 2 5 8 0
2
Press DISPLAY until a counter reading appears on the dispay panel. � By pressing the DISPLAY button, you can change the display to show the counter reading, channel position* or clock time.
* channel position is not displayed during playback.
3 6 9
4
C. RESET
RESET COUNTER
Press C. RESET before starting recording or playback.
2
3 ¡
� The counter is reset to �0:00:00� and shows the exact elapsed time as the tape runs.
1
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished.
Usable Cassettes And Their Recording Times
This video recorder can record on regular VHS and Super VHS cassettes. However, it will record and play back regular VHS video signals only. It is not possible to play back a recorded Super VHS tape.
Type of Cassette E-240 E-180 E-120 E-90 E-60 E-30 Recording/Playback Time (minutes) SP Speed LP Speed 240 480 180 360 120 240 90 180 60 120 30 60 Recording/Playback Time (minutes) SP Speed 160 120 90 60 30 EP Speed 480 360 270 180 90 Recording/Playback System PAL/MESECAM PAL/MESECAM PAL/MESECAM PAL/MESECAM PAL/MESECAM PAL/MESECAM
START RECORDING
1 2 3
Press RECORD on the recorder.
ENGAGE ITR MODE
Press RECORD again. " " blinks and 0:30 appears on the front display panel.
SET RECORDING DURATION
If you want to record for more than 30 minutes, press RECORD to extend the time. Each press extends recording time by 30 minutes.
Type of Cassette T-160 T-120 T-90 T-60 T-30
Recording/Playback System NTSC NTSC NTSC NTSC NTSC
NOTE:
You can only perform ITR using the RECORD button on the recorder's front panel.