JVC HR-J4404UM
Instrukcja Obsługi

22

PLAYBACK AND RECORDING FEATURES (cont.)
Record One Program While Watching Another
During recording... � If using the RF connection ( pg. 4), press TV/VCR. The VCR's VCR indicator goes out and the TV broadcast being recorded disappears. � If using the AV connection ( pg. 4), change the TV's input mode from AV to TV.

Recording Features

ENGAGE TV MODE

1
� £

q

SELECT CHANNEL FOR VIEWING

2

5/8

3

2

Use the TV�s channel selector to set the channel you want to watch.

Display Elapsed Recording Time
1 4 7 2 5 8 0
3

RESET COUNTER TO ZERO

1
TV/VCR

Before recording starts, press C.RESET. The counter resets to zero and displays the exact elapsed time as the tape runs.

6 9

DISPLAY ELAPSED TIME ON SCREEN

2
3 7 8 ¢
��¡

OSD C.RESET
1�� ¶ 4

During recording, press OSD at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press OSD again to remove the display. � Make sure "SUPERIMPOSE" is set to "ON" ( � The indications are not be recorded. pg. 16).