Record One Program While Watching Another
During recording... � If using the RF connection ( pg. 4), press TV/VCR. The VCR's VCR indicator goes out and the TV broadcast being recorded disappears. � If using the AV connection ( pg. 4), change the TV's input mode from AV to TV.
ENGAGE TV MODE
1
� £
q
2
5/8
3
SELECT CHANNEL FOR VIEWING
2
Use the TV�s channel selector to set the channel you want to watch.
Display Elapsed Recording Time
1 4 7 2 5 8 0
3
RESET COUNTER TO ZERO
1
TV/VCR
Before recording starts, press C.RESET. The counter resets to zero and displays the exact elapsed time as the tape runs.
6 9
DISPLAY ELAPSED TIME ON SCREEN
2
3 7 8 ¢
��¡
OSD C.RESET
1�� ¶ 4
During recording, press OSD at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press OSD again to remove the display. � Make sure "SUPERIMPOSE" is set to "ON" ( � The indications are not be recorded. pg. 17).
