JVC HR-J690EU
Instrukcja Obsługi

Checking, canceling or changing programme settings
A Disengage timer recording standby mode
Press #, then press 1. � When �AUTO TIMER� is set to �ON� ( 12), press only 1.

Automatic Satellite Programme Recording
You can automatically record a satellite programme which is timer-programmed on your satellite receiver. on the rear panel. B Set timer programme on satellite receiver referring to its instruction manual.

A Connect a satellite receiver to the L-2 IN/DECODER connector

B Access Program Check screen
Press ".

C Load a cassette with the record safety tab intact. D Set �L-2 SELECT� to �A/V� or �SAT�. ( 13) E To set the tape speed, press SP/LP (p). The current setting for F
the tape speed appears on the display panel or the screen for about 5 seconds. Press SP/LP (p) again to change the setting while tape speed is displayed.

C Access Program screen
Press " again. Each time you press ", the next programme�s screen appears.

D Cancel or change programme setting
To cancel a programme, press &. To change a programme, press the appropriate button: START+/�, STOP+/�, DATE+/�, DAILY (number key �8�), WEEKLY (number key �9�), PR+/�, VPS/PDC (number key �7�) and/or SP/LP (p). � To change �TV PROG� to �SAT� for the channel position, press the number key �0�.

Press SAT# for more than 2 seconds. The recorder turns off automatically and enter the Automatic Satellite Programme Recording mode (the SAT# indicator lights up). When signals come into the recorder from the satellite receiver, the recorder starts recording (the SAT# indicator blinks). The recorder stops recording and turns off when signals stop coming in.

NOTES:
� Be sure not to turn on the satellite receiver before the programme starts broadcasting; otherwise, the recorder starts recording when the satellite receiver is turned on. � To disengage the Automatic Satellite Programme Recording mode, press SAT# (the SAT# indicator goes off). � Depending on the type of satellite receiver, Automatic Satellite Programme Recording may not be compatible. � B.E.S.T. does not work in the Automatic Satellite Programme Recording mode. � Power Save mode does not work in the Automatic Satellite Programme Recording mode. � Just Clock does not work in the Automatic Satellite Programme Recording mode.

E Return to normal screen
Press " repeatedly until no Program screen is shown.

F Re-engage timer recording standby mode

Press #. The recorder turns off automatically and �#� is displayed on the display panel. � When �AUTO TIMER� is set to �ON� ( 12), the timer recording standby mode automatically resumes when you turn off the recorder.

� 10 �