JVC HR-V616EK
Instrukcja Obsługi

Timer Recording
Up to 8 timer recording programmes can be made. Before starting: � Set the clock properly. ( 13) � Set �COLOUR SYSTEM� to the appropriate mode. ( � Load a cassette with the record safety tab intact.

12)

NOTES:
� PDC recording is not possible in Central and Eastern Europe. � If all the 8 programmes have already been set, �PROGRAM FULL� appears on the screen. � If the clock is not set, �CLOCK MUST BE SET� appears on the screen. � After timer recording is completed, the recorder turns off automatically. � If the tape reaches its end during timer recordings, the recording stops and �#�, � � and � $� on the display panel blink. Press # to disengage timer, then press 0 on the recorder to eject the cassette or press 1 then press 3 to rewind the tape. � You can programme the timer recording while a regular recording is in progress; the menu screens will not be recorded.

1
START

2
STOP

3
DATE

� Make sure the channel position number you wish to record is displayed; if �TV PROG� displays �� ��, set the channel position number correctly. Press PR / to input the channel position number on which your recorder receives the station. Then press OK. � To set the channel position number for the satellite broadcast station, press the number key �0� to change �TV PROG� to �SAT�. Press PR / to input the channel position number on which your satellite receiver receives that station. Then press OK. � To set the tape speed, press p(SP/ LP). � To set the VPS/PDC mode, press VPS/PDC (number key �7�). � To change the stop time, press STOP / (number keys �2� and/or �5�). � To timer-record daily (Monday�Friday) or weekly serials, press DAILY (number key �8�) or WEEKLY (number key �9�). Pressing the button again makes the �DAILY� or �WEEKLY� display disappear. � To change the channel position number, press PR / . D Press OK or PROG. � If �PROGRAM OVERLAPPED� appears, see �Program overlap warning display� ( 10). E Press #. The recorder turns off automatically and �#� is displayed on the display panel. To timer-record a satellite broadcast using the SHOWVIEW system: A Perform �Satellite Receiver Control Set� ( 5). B Perform steps 1 � 5. In step 3, you cannot set �VPS/PDC� to �ON�. C Leave the satellite receiver�s power on.

4
VPS/PDC

5
DAILY

6
WEEKLY

7
0000

8
AUX

9

0
AUDIO TV/ VCR

OG PR

ME

PR

NU

OK

PR

30S

EC

Express Timer Programming
�EXPRESS PROGRAMMING�, then press OK or program screen appears.

A Press PROG to access the Timer Programming Set screen. B Press RT to place the pointer (highlighted bar) next to
. The

REC

SHOWVIEW� Timer Programming
The SHOWVIEW numbers are the numbers next to the programme in most TV listing.

�SHOWVIEW�, then press OK or SHOWVIEW NO. screen appears.

A Press PROG to access the Timer Programming Set screen. B Press RT to place the pointer next to
. The

C Press START / (number keys �1� and/or �4�), STOP / (number keys �2� and/or �5�), DATE / (number keys �3� and/or �6�) or PR / repeatedly to enter the start time, stop time, date or channel. � Press and hold START / or STOP / to increase the time in 30-minute intervals. � To set the tape speed, press p(SP/LP). � To set the VPS/PDC mode, press VPS/PDC (number key �7�). � To timer-record daily (Monday�Friday) or weekly serials, press DAILY (number key �8�) or WEEKLY (number key �9�). Pressing the button again makes the �DAILY� or �WEEKLY� display disappear. D Press OK or PROG. � If �PROGRAM OVERLAPPED� appears, see �Program overlap warning display� ( 10). E Press #. The recorder turns off automatically and �#� is displayed on the display panel.
To timer-record a satellite broadcast using Express Timer Programming: A Perform �Satellite Receiver Control Set� ( 5). B Perform steps 1 � 5. In step 3, press the number key �0� to 15 3 change �TV PROG� to �SAT�. Then press PR / to enter the channel position for the satellite broadcast. You cannot set �VPS/ PDC� to �ON�. C Leave the satellite receiver�s power on.

input the SHOWVIEW number, then press OK. The SHOWVIEW program screen appears. � If the number you entered is invalid, �ERROR� appears on the screen. Press & and input a valid SHOWVIEW number.

C Press the appropriate number keys to

�9�