Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 6 (kliknij aby zobaczyć)
� Playback �
NOTE:
It is not possible to select the Automatic Timer Standby function if the cassette�s record safety tab is removed.
Reverse Reverse search 3 steps Reverse play Reverse slow motion 1 step Slow motion 1 step Normal play
Forward Forward search 4 steps
Playing back tape repeatedly (100 times) � Repeat Play
During playback, press and hold 4 for more than 5 seconds. The play indicator ($) on the display panel starts blinking slowly. To stop playback, press 8 on the remote control or 0 on the recorder.
NOTE:
When the tape is not running
Rewind/fast-forward Press 3 or 5. Eject the tape Press 0. � You can also eject the cassette when the recorder is turned off. Turn off the recorder Press 1.
Pressing 4, 3, 5 or 9 also cancels repeat playback.
Locating beginning of recordings � Index Search
Index codes are placed on the tape at the beginning of each recording when recording on this recorder. A While the tape is not running, press 2 or 6 on the
B
Playback Features
Adjusting tracking condition � tracking adjustment
Automatic tracking adjustment Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback. Manual tracking adjustment If automatic tracking cannot eliminate noises well during playback, follow the procedures below.
remote control to start search. To access a recording of 2 to 9 index codes away, press 2 or 6 repeatedly until the correct number is displayed on the screen (only if �O.S.D.� is set to �ON� ( 10)). Playback begins automatically when the desired recording is located. Beginning of the current program recorded Previous program recorded Current position on the tape Next program recorded
62
Beginning of the 2nd next program recorded 2nd next
A Press p on the remote control during playback to activate B
manual tracking. Press PR + and � to eliminate the noises. Press it briefly for a fine adjustment, or press and hold for a coarse adjustment. � Press p again to reactivate automatic tracking.
Soundtrack Selection
Your recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select. Pressing AUDIO changes the soundtrack being played back as follows: HI-FI: Normally select this. Hi-Fi sound is played back. HI-FI L: Sound on the left Hi-Fi channel is played back. HI-FI R: Sound on the right Hi-Fi channel is played back. NORM: Sound on the normal track is played back. NORM HI-FI: Both sounds on the Hi-Fi track and normal track are mixed and played back.
After ensuring that the recorder is turned off and that the timer mode is disengaged, press REVIEW on the remote control. � The recorder turns on, and rewinds to the index code indicating the beginning of the last timer-recorded program, then begins playback automatically. � You can access a program of 2 to 9 index codes away from the current position on the tape. If, for example, you have 5 programs recorded and you want to watch the third one, press REVIEW three times. � The Instant Review function will also operate if the recorder is turned on.
Locating beginning of timer recordings � Instant Review
NOTE:
The above indication appears when �O.S.D.� is set to �ON� ( 10), though the monitor sound changes in sequence.
Skipping unwanted portions � Skip Search
Press 30 SEC on the remote control once to 4 times during playback. Each press initiates a 30-second period of high speed playback (up to 2 minutes). When the specified portion of the tape is skipped, normal playback resumes automatically. To return to normal playback during Skip Search, press 4.
Automatic operations after rewinding � Next Function Memory
The Next Function Memory �tells� the recorder what to do after rewinding is complete. Ensure that the recorder is in stop mode. � For Automatic Playback Start Press 3, then press 4 within 2 seconds. � For Automatic Power Off Press 3, then press 1 within 2 seconds. � For Automatic Timer Standby Press 3, then press # within 2 seconds. �6�
