JVC HR-VXC1UJ
Instrukcja Obsługi

Stereo Recording and Playback / Separate Audio Program (SAP)
Stereo Recording and Playback
The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts.

When a MTS STEREO broadcast is received, the word STEREO will appear on the screen and the program can be viewed or recorded in stereo. The Hi-Fi STEREO recording procedure is the same as for normal recordings.

STEREO

TV

VCR

DVD

POWER

NOTE: When using a CATV system, stereo TV programs may be transmitted over a mono cable channel. In this case the word "STEREO" will not appear and the sound will be in mono.

Output selection
OPEN/ CLOSE

DVD MENU DISPLAY

MARKER A.TRK SUB TITLE

RETURN C.RESET ANGLE

ZERO RETURN
SEARCH MODE REPEAT A-B

When viewing an MTS STEREO TV program, or playing a prerecorded VHS Hi-Fi STEREO videotape, press A. MONITOR to select how the audio will be heard through the speakers. Normally set to the Hi-Fi STEREO position, this button can be set to the MONO position if the stereo broadcast or videotape audio is of poor quality. The "R" and "L" positions allow the audio from the Right or Left Hi-Fi channel to be heard over both TV speakers. This button has no effect when viewing a MONO videotape or TV program. Each time when you press the button, OUTPUT SELECTION display appears on the screen for several seconds. Refer to the chart below.
OUTPUT SELECTION STEREO L ch R ch MONO SOUND HEARD ON BOTH SPEAKERS STEREO LEFT CHANNEL AUDIO RIGHT CHANNEL AUDIO MONO

SP/EP
PLAY MODE

ZOOM

TITLE

TV
POWER INPUT

TV VOL

0
REW

TIMER

TV/VCR
PLAY

FF

STOP

REC

PAUSE

SKIP /INDEX

TV/VCR CH +

SKIP /INDEX

Separate Audio Program (SAP)
Your VCR is fitted with a SAP broadcast system which enables you to switch to a separate audio program when viewing a selected channel. This function applies only when the program is broadcast in multi-languages through the SAP broadcast system.

SET
SET UP MENU

ENTER/ SELECT

SET
CANCEL

T V /V CR C H �
OSD
A.MONITOR
SLOW

SKIPCH EAR S

1 Press SETUP MENU. Then press 2 Then press ENTER to select [ON].
Then press SETUP MENU until the menu screen is cleared.

or

to select SAP.
MENU TIMER REC SET AUTO REPEAT ON SAP ON SURROUND ON CH SET UP SYSTEM SET UP

VCR/DVD/TV

OFF OFF OFF

�+/-/ENTER/MENU�

NOTE: � When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural. � When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/Video cord not connected), the sound will be monaural.

Listening to SAP
When the VCR is turned on or a channel selection is made, make certain the letters "SAP" appears on the screen. This means that the "Separate Audio Program" broadcasting is available.

STEREO SAP

OR

SAP

33