JVC HR-XV11EX
Instrukcja Obsługi

Operation with DVD and Video CD Playing a DVD and Video CD
Playback Setup
DVD VCD2.0 VCD1.1

General Features
Note Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.

Turn on the TV and select the video input source connected to the DVD with no label player. Audio system: Turn on the audio system and select the input source connected to the DVD player.

Moving to another TITLE

DVD

1/3

1 2 3

Press OPEN/CLOSE to open the disc tray. Load your chosen disc in the tray, with the label facing up. When a double-sided DVD is inserted, make sure the side you want to play is facing down. Press OPEN/CLOSE to close the tray. READING appears on the TV screen, and playback starts automatically. If playback does not start, press PLAY 2. In some cases, the disc menu might appear instead.

When a disc has more than one title, you can move to another title as follows: Press DISPLAY when playback is stopped, then press the appropriate numbered button (0-9) to select a title number.

Moving to another CHAPTER/TRACK
DVD VCD1.1
1/12 1/3

If a menu screen is displayed
The menu screen may be displayed first after loading a DVD or Video CD which contains a menu.
DVD

Use the 1 2 3 4 buttons to select the title/chapter you want to view, then press OK to start playback. Press TITLE or DVD MENU to return to the menu screen.
VCD2.0

When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows: Press SKIP/INDEX . or > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press SKIP/INDEX . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, press DISPLAY. Then, press 3/4 to select C 4 (chapter) (or for a Video CD, select T for track). Then, enter the chapter/track number using the numbered buttons (0-9). Note For two-digit numbers, press the buttons in rapid succession.

Use the number buttons to select the track you want to view. Press RETURN to return to the menu screen. Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen. You also may set PBC to Off under setup. See page 20. Notes If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized (see � Parental Control�, on page 21). DVDs may have a region code. Your player will not play discs that have a region code different from your player. The region code for this player is 2 (two). To watch a DVD during timer recording standby mode, press POWER and VCR/DVD to switch to DVD mode.

Slow Motion

DVD

VCD2.0

VCD1.1

1 Press SKIP/INDEX . or > during pause.
The player will enter SLOW mode.

2 Use the SKIP/INDEX . or > to select the required speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T 1/2 (forward). 3 To exit slow motion mode, press PLAY 2. Note Slow motion playback in reverse is not applicable for Video CD.

26