Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 49 (kliknij aby zobaczyć)
Troubleshooting (continued)
Problem (Playback) The unit does not start playback. Solution � Insert a readable disc with the playback side facing down. The DVD+R/CD-R must be Finalised. � Make sure the disc is not scratched or warped. � Press SETUP to turn off the system setup menu screen. � You may need to enter the password in order to unlock the disc for playback. � Moisture may have condensed inside this unit. Remove the disc and leave this unit turned on for about an hour.
The aspect ratio of the screen � The aspect ratio is fixed on the DVD disc. cannot be changed even � Depending on the TV, it may not be possible to though you have set the TV change the aspect ratio. display. Cannot activate some features � The features may not be available on the DVD. e.g. Angles, Subtitles, or � Changing the language for the sound or subtitle is multi-language Audio. prohibited on this DVD. Not able to select some items � Press STOP button twice before selecting the system in the setup/system menu. setup menu. � Depending on the disc availability, some menu items cannot be selected. Unable to play DivX movies. � Ensure that the DivX file is encoded according to the �Home Theatre Profile� with the DivX encoder. � Check that the DivX movie downloaded is a complete file. � If the signal is too weak, adjust the antenna or connect an external antenna for better reception. � Increase the distance between this unit and your TV or VCR. � Tune in to the correct frequency. � Place the antenna further away from any equipment that may be causing the interference. � Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord and try to operate again as usual. English 49