PHILIPS HTS5500C/55
Instrukcja Obsługi

Getting Started (continued)
Selecting the correspond color system The color system of the DVD system, DVD and TV should match. Only then will it be possible to play a DVD on this system. Before changing the TV system, determine the color system of your TV. Setting the TV Display Set the aspect ratio of the DVD system according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback.

1 In disc mode, press SETUP. 2 Press 2 repeatedly to select �VIDEO
SETUP PAGE.�

1 In disc mode, press SETUP. 2 Press 2 repeatedly to select �VIDEO
SETUP PAGE.�

3 Press 34 to highlight { TV TYPE, } then
press 2.

3 Press 34 to highlight { TV DISPLAY, }
then press 2.

TV TYPE TV DISPLAY PROGRESSIVE PICTURE SETTING

TV TYPE TV DISPLAY PROGRESSIVE PICTURE SETTING

4:3 PAN SCAN 4:3 LETTER BOX 16:9

4 Press 34 to highlight one of the options
below: { PAL }
Select this if the connected TV has the PAL color system. It will change the video signal of an NTSC disc and output it to PAL format.

4 Press 34 to highlight one of the options
below: { 4:3 PAN SCAN }
Select this if you have a conventional TV and want both sides of the picture to be trimmed or formatted to fit your TV screen.

{ NTSC }
Select this if the connected TV has the NTSC color system. It will change the video signal of a PAL disc and output it to NTSC format.

{ 4:3 LETTER BOX }
Select this if you have a conventional TV. In this case, a wide picture with black bands on the upper and lower portions of the TV screen will be displayed.

{ MULTI }
Select this if the connected TV is compatible with both NTSC and PAL (multi-system.) The output format will be in accordance with the video signal of the disc.

{ 16:9 }
Select this if you have a widescreen TV.

5 Select a setting and press OK.
� Follow the instructions shown on the TV to confirm the selection (if any.) � If a blank/distorted TV screen appears, wait for 15 seconds for the auto recovery.

5 Select a setting and press OK.

TIPS:

The underlined option is the factory default setting. To return to the previous menu, press 1. To remove the menu, press SETUP.

21
001-051-hts5500-55-Eng3 21 05/04/05, 4:17 PM 3139 246

14793

E n g l i s h