JVC HV-29JL25/KSK
Instrukcja Obsługi

TV channel presetting
To register the TV channels automatically (AUTO PROGRAM)
You can register the TV channels into the TV�s channel list automatically. 1 Display the INSTALL menu. � MENU INSTALL 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR list) automatically. 3 The EDIT menu appears.
To edit the channel list If a channel is not registered Proceed to the Step 3 of �To edit the channel list (PR list)� on this page.

6 Press the green or red button to search for the TV channel. Searching stops when a channel is found and displayed. 7 Repeat step 5 until your desired TV channel appears.
If the reception is poor If noisy sound is heard Press the blue or yellow button to fine tune the TV channel. Press the 3 button to choose an appropriate sound system.

8 Press the MENU/OK button to exit the menu.

To edit the channel list (PR LIST) (MOVE and DELETE in the EDIT menu)
You can edit the TV channel list as you like. Note: After this operation, other channel�s PR numbers will be changed. 1 Display the INSTALL menu. � MENU INSTALL 2 Choose EDIT/ MANUAL, then press the MENU/OK button. EDIT menu appears.
EDIT

Proceed to the Step 3 of �To register the channel manually� on this page. To exit the menu Press the MENU/OK button.

For details of �SETUP TOUR�, see page 16.

To register the TV channels manually (MANUAL in the EDIT menu)
You can register the TV channels into the TV�s channel list manually. 1 Display the INSTALL menu. � MENU INSTALL 2 Choose EDIT/ MANUAL, then press the MENU/OK button. EDIT menu appears.
EDIT

PR AV 01 02 03 04 05 06

ID

CH/CC CH CH CH CH CH CH CH ID 21 03 05 07 08 09 11 MANUAL

PR AV 01 02 03 04 05 06

ID

CH/CC CH CH CH CH CH CH CH ID 21 03 05 07 08 09 11 MANUAL

OK

MOVE INSERT DELETE

3 Choose the channel which you want to change PR number, or delete. 4 Do the following action:
To change the PR number (MOVE) To delete the channel (DELETE) Press the 3 button. Then move it to the PR number you want to use it for the channel. Finally press the 2 button. Press the yellow button.

OK

MOVE INSERT DELETE

3 Choose the channel which you want to register. 4 Press the blue button to activate the MANUAL function. The sound system of the channel appears at the right of the CH/CC number. 5 Press the 3 button to choose an appropriate sound system. For details, see �SOUND SYSTEM� on page 11.

5 Press the MENU/OK button to exit the menu.

� About the basic operations of the menu, please see the �How to operate menus and menu locations� on page 4. 17