jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
Tekstowy podgląd strony 185 (kliknij aby zobaczyć)
1-3-31. EJ Arm 1. Removal procedure 1) Remove the hook 1 of the tension coil spring (EJ arm) 3 that is hooked on the round hole A. 2) Remove the EJ arm and the tension coil spring (EJ arm) 2 all together in the direction of the arrow. 3) Remove the tension coil spring (EJ arm) 3 from the EJ arm 4. 2. Attachment procedure 1) Apply grease to the EF arm. Amount of grease: a ball of 1.0 mm diameter of grease 2) Install the tension coil spring (EJ arm) 3 into the round hole of the EJ arm 4 with the hook facing upward. 3) Insert the top tip (bent) portion B of the EJ arm 4 into the groove of the mechanical chassis. Insert the dowel C into the round hole of the EJ arm. 4) Insert he tension coil spring 1 into the round hole A of the mechanical chassis with the hook facing upward.
Points to be noted
� When installing the EJ arm, confirm the front side and rear side so that the correct side is selected. � Extension spring (EJ) must not have elongation and opening of hook.
2 EJ arm, Extension spring (EJ) 1 Remove the hook. B
The spring hook faces upward 3 Extension spring (EJ)
The spring hook faces upward
A 4 EJ arm
Groove of the mechanical chassis Dowel C
Apply Grease Points to be noted
Apply grease when installing it Amount of grease: a ball of 1.0 mm diameter of grease EJ arm
