JVC HV-Z29V1/S
Instrukcja Obsługi

Setting up your TV
CAUTION
� Turn off all the equipment including the TV before connecting anything.

1 Connecting the woofer unit (only for HV-Z29V1)
1 Fitting the woofer unit Align the projection on the base of the woofer unit with the hole in the top of the TV, and insert the connector into the woofer terminal. 2 Connecting the supplied woofer connector to the BASS SPEAKER OUT terminal on the back of the TV If the woofer unit is not connected, you will not be able to enjoy the bass sound. � Connect so that the lever is raised. � When disconnecting the woofer connector, do so while pushing the lever.

Lever

2 Connecting the aerial and VCR
� Aerial cable is not supplied. Use a good quality 75-ohm coaxial cable. � Read the manual that came with the VCR before connecting. If not connecting a VCR (see Fig. A): Connect an aerial cable to the aerial socket on this TV. If connecting a VCR (see Fig. B): 1 Connect the aerial cable to the aerial input socket on the VCR, and connect the VCR and TV with another aerial cable. 2 Connect the VCR�s VIDEO OUT (video output) jack and the TV�s VIDEO jack with a video cable. To connect a VCR to the TV with an S-VIDEO cable: Connect the VCR�s S-VIDEO OUT (SVIDEO output) connector and TV�s S connector with an S-VIDEO cable A, instead of connecting with a video cable. 3 Connect the VCR�s AUDIO OUT (audio L/ R output) jacks and the TV�s AUDIO jacks (L/MONO and R) with an audio cable. � If the VCR�s audio output is in mono, connect the VCR�s AUDIO OUT (audio output) jack and the TV�s AUDIO L/ MONO jack with an audio cable.

Fig. A

Fig. B

A

3