Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 31 (kliknij aby zobaczyć)
To turn on or off Recording Timer after it has been set 1 Press CLOCK/TIMER repeatedly until
�REC� appears on the display. The REC (Recording Timer) indicator starts flashing on the display and the (Timer) indicator remains lit.
CLOCK /TIMER
To check the remaining time until the shut-off time, press SLEEP once so that the remaining time (minutes) until the shut-off time appears for about 5 seconds. To change the shut-off time, press SLEEP repeatedly until the desired time length appears on the display. To cancel the setting, press SLEEP repeatedly so that the SLEEP indicator goes off. � Sleep Timer is also canceled when you turn off the unit.
2 To turn off the Recording Timer, press
CANCEL/DEMO.
CANCEL /DEMO
The REC (Recording Timer) indicator goes off from the display (�REC OFF� appears on the display for about 2 seconds). The Recording Timer is canceled, but the setting for the Recording Timer remains in memory. � Or � To turn on the Recording Timer, press SET/DISPLAY.
SET /DISPLAY
Timer Priority
Since each timer can be set separately, you may wonder what happens if the settings for these timers overlap. Recording Timer has priority over Daily Timer and Sleep Timer. Below are some examples. � If Daily Timer is set to come on while Recording Timer is operating, Daily Timer will not come on at all.
6:00 6:30 7:00 7:30
�OK � appears on the display for about 2 seconds. The settings you have done are shown on the display in sequence for your confirmation.
Recording Timer Daily Timer
Using Sleep Timer
With Sleep Timer, you can fall asleep to music. You can set Sleep Timer only while the unit is turned on.
does not work.
� If Sleep Timer is set to come on while Recording Timer is operating, Sleep Timer will not come on at all.
6:00 6:30 7:00 7:30
How Sleep Timer actually works
The unit automatically turns off after the specified time length passes.
Recording Timer Sleep Timer canceled.
On the remote control ONLY:
1
Press SLEEP.
� If Recording Timer and Daily Timer are set to come on at the same time, Recording Timer will activate.
SLEEP
The time length until the shut-off time
6:00
6:30
7:00
7:30
appears and the SLEEP indicator starts AUX flashing on the display. � Each time you press the button, the time length changes as follows:
SLEEP 10 SLEEP 20 SLEEP 30 SLEEP 60
Recording Timer does not work.
Canceled
SLEEP 120
SLEEP 90
� If the built-in clock has not been set, �CLOCK ADJUST� appears on the display.
2
Wait for about 5 seconds after specifying the time length.
The SLEEP indicator flashes slowly until Sleep Timer activates.
