ICOM IC-91AD
Instrukcja Obsługi

DV MODE OPERATION (Optional UT-121 is required for IC-91A) D One-touch reply using the call record
The stored call signs in the call record can be used to the call. qAfter receiving a call, push and hold [RX�CS](CALL) for 1 sec. Or, while pushing and holding [RX�CS](CALL), rotate [DIAL] to select the desired call sign record.
-DUP DV

7
1 2 3 4 5 6 7 8 9 10 11 12 13

Important! Setting call signs with the �One-touch reply using the call record� operation as at left are for temporary operation only. Therefore, the set call signs will be overwritten when another call record is used to set call signs.
� Never saved into a call sign memory.

B

439 706 25

If you want to save the set call signs, see �Copying the call record contents into call sign memory� (p. 50) for details.

AAAAAA

The received call sign is displayed while pushing and holding [CALL/RX�CS] when [DIAL] is rotated while [CALL/RX�CS] is pushed. � Set your own call sign (MY) in advance. (p. 34) � The call sign stored in �CALLER� is stored as �UR,� �RXRPT1� is stored as �R2� and �RXRPT2� is stored as �R1.� � Error beeps sound when a call sign is received incorrectly, and no call sign is set in this case.

� For your information When a call specifying your call sign is received, the call signs
of the calling station and the repeater it is using can be used for operation automatically. � When �RX call sign auto write� (p. 93) is set to �AUTO,� the station call sign in �CALLER� is set to �UR� automatically. � When �Repeater call sign auto write� (p. 93) is set to �AUTO,� the stored station call sign in �RXRPT1� is stored as �R2� and �RXRPT2� is stored as �R1� automatically.

wPush [PTT] to transmit; release to receive.

14 15 16 17 18 19
47