SONY ICFCD823L
Instrukcja Serwisowa

SECTION 1 GENERAL
This section is extracted from instruction manual.

Setting the Clock and Date
1 Set the alarm setting dial to ALARM MODE OFF. 2 Plug in the clock radio. The display will flash �AM 12:00� or �0:00�. 3 Press CLOCK for a few seconds. You will hear a beep and the year will start to flash in the display. 4 Press CLOCK + or � until the correct year appears in the display. 5 Press CLOCK once. 6 Repeat steps 4 and 5 to set the month, day, hour, and minute. After setting the minute, press CLOCK to start the counting of the seconds, and you will hear two short beeps. � To display the year and date, press SNOOZE/ DATE/SLEEP OFF once for the date, and within 2 seconds press it again for the year. The display shows the date or year for a few seconds and then changes back to the current time. � To set the current time rapidly, hold down CLOCK + or �. � The clock system varies depending on the model you own. 12-hour system: �AM 12:00� = midnight 24-hour system: �0:00� = midnight � In step 6, when you press CLOCK after the minute setting to activate the clock, the seconds start counting from zero. � When the alarm setting dial is set to ALARM TIME SET A or B, the clock cannot be set. To change the display to the daylight saving time (summer time) indication Press D.S.T./SUMMER T. �s� is displayed and the time indication changes to summer time. To deactivate the summer time function, press D.S.T./SUMMER T. again.

�4�