� Top side installation q Remove the 1 screw (M4 � 8) from both side of the MB-78.
t Remove the 2 screws (M4 � 8) from both side of the side panel (front-end).
w Remove the handles from bottom bar. And turn the handles upside down, then replace the handles right side and left side.
y Attach the MB-78 to the top side of the repeater. Then tighten the 1 supplied screws (M4 � 8) and 2 removed screws to each side. (6 screws at total)
e Attach the handles to the bar, then tighten the screws. u The top side installation should look like below.
r The completed MB-78 should look like below.
i Turn the repeater upside down, then removing the 4 legs for mounting the 19 inch rack.
