ALPINE IVAC8000R
Instrukcja Obsługi

English

Basic Operation
Adjusting the Volume/ Bass/Treble/Balance/ Fader

12

1

Press the rotary encoder repeatedly until the mode you wish to adjust is obtained. Each press changes the modes as follows: � BAS. � TRE. � BAL. � FAD. � VOL. The volume level can be adjusted at any time by just rotating the rotary encoder.

2

Rotate the rotary encoder to set to the desired sound within 5 seconds after selecting the mode. Note: If the rotary encoder is not turned or pressed within 5 seconds after selecting the BAS. (Bass), TRE. (Treble), BAL. (Balance), or FAD. (Fader), the unit automatically defaults back to the VOL. (Volume) mode.

1

Muting the Sound

1
32

Press the MUTE button to switch between the Mute On and Off modes. When the MUTE On mode is selected, the volume level instantly decreases.